Driving your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
CAUTION
Do not use the
or
position
during
cooling
operation
in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
to the
control knob to the lower speed.
position and fan speed
OJB040206L
OJB040207L
Manual climate control system
To defog inside windshield
To defrost outside windshield
1.
Set the fan speed to the “3” or “4” posi-
tion.
• For maximum defrosting, set the tem-
perature
control
to
the
extreme
1.
2.
3.
4.
Select any fan speed.
Select desired temperature.
2.
Set the temperature to the extreme hot
position.
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
Select the
or
position.
3.
4.
Select the
The outside (fresh) air and air condi-
tioning will be selected.
position.
The outside (fresh) air and air condi-
tioning will be selected.
To reduce the probability of fogging up
the inside of the windshield, the air intake
control is set to the outside (fresh) air
position automatically and the air condi-
tioning will automatically operate if the
posi-
tion. If you don't want the air conditioning
and the outside (fresh) air position, press
the corresponding button to cancel the
operation.
•
Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
To reduce the probability of fogging up
the inside of the windshield, the air intake
control is set to the outside (fresh) air
position automatically and the air condi-
tioning will automatically operate if the
posi-
tion. If you don't want the air conditioning
and the outside (fresh) air position, press
the corresponding button to cancel the
operation.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up
inside of the windshield.
mode is selected to the
or
mode is selected to the
or
4
46
| Categories | Kia Manuals, Kia Rio Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)