2010 Kia Rio Owners Manual

Knowing your vehicle
Once you have installed the LATCH child
restraint, assure that the seat  is properly
attached   to    the   LATCH   and   tether
anchors. Also, test the child restraint seat
before  you place  the child  in  it. Tilt  the
seat from side to side. Also try  to tug the
seat forward. Check to see if the anchors
hold the seat in place.
WARNING
When using  the vehicle's  "LATCH"
system  to  install  a  child  restraint
system in  the rear seat,  all unused
vehicle  rear  seat  belt  metal   latch
plates   or  tabs   must   be   latched
securely  in their  seat  belt buckles
and the  seat belt webbing  must be
retracted behind  the child  restraint
to prevent  the  child from  reaching
and taking hold of  unretracted seat
belts.  Unlatched metal  latch plates
or tabs may allow the child to reach
the  unretracted   seat  belts   which
may  result  in  strangulation  and  a
serious injury  or death to  the child
in the child restraint.
WARNING - LATCH
Anchors
If the child restraint is not anchored
properly,  the risk  of  a  child  being
seriously injured or killed in  a colli-
sion greatly increases.
1JBA3053
LATCH  anchors have  been  provided  in
your  vehicle.  The  LATCH  anchors  are
located in the left and right outboard rear
seating   positions.  Their   locations  are
shown  in   the  illustration.  There  is   no
LATCH  anchor  provided  for  the  center
rear seating position.
The LATCH anchors are located between
the seatback and the seat cushion of the
rear seat  left and right  outboard seating
positions.
WARNING - LATCH lower
anchors
CAUTION
LATCH lower anchors are only to be
used with the left and right rear out-
seating    positions.   Never
to    attach     an    LATCH
Do not allow the rear seat belt  web-
bing to get scratched or pinched by
the   child-seat   latch   and   LATCH
anchor during the installation.
board
attempt
equipped seat in the  center seating
position.   You   may   damage    the
anchors or the anchors may fail and
break in a collision.
Follow   the  child   seat   manufacturer’s
instructions    to   properly   install    child
restraint  seats  with  LATCH  or  LATCH-
compatible attachments.
3
48
Product Specification
CategoriesKia Manuals, Kia Rio Manuals
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 236 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field