In case of an emergency
✽
NOTICE
After checking the fuse box in the engine
compartment, securely install the fuse
box cover. If not, electrical failures may
occur from water leaking in.
1JBA6005
1JBA6007
Engine compartment
Main fuse
1.
2.
3.
4.
Turn the ignition switch and all other
switches off.
Remove the fuse box cover by press-
ing the taps and pulling up.
Check the removed fuse; replace it if it
is blown.
If the MAIN fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery cable.
2. Remove the screws shown in the pic-
ture above.
3. Replace the fuse with a new one of the
same rating.
Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
4. Reinstall in the reverse order of
removal.
If it fits loosely, consult an authorized Kia
dealer.
✽
NOTICE
If the MAIN fuse is blown, consult an
authorized Kia dealer.
6
8
| Categories | Kia Manuals, Kia Rio Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)