wise, there is the danger of an accident occur‐
ring.◀
Press the button.
Speed differences
▷
▷
If active: press twice.
Great speed differences with vehicles
driving ahead of you, e.g., when rapidly ap‐
proaching a truck or when another vehicle
swerves into your own lane, cannot be compen‐
sated for by the system.◀
If interrupted: press once.
The displays go out. The stored desired speed
and distance are deleted.
Interrupting
When active, press the button.
If interrupting the system while stationary, press
on the brake pedal at the same time.
The system is automatically interrupted if:
▷
▷
▷
The brakes are applied.
Transmission position D is disengaged.
DTC Dynamic Traction Control is activated
or DSC is deactivated.
Press the rocker switch up or down repeatedly
until the desired speed is set.
▷
▷
DSC is actively controlling stability.
If active, the displayed speed is stored and the
vehicle reaches the stored speed if the road is
clear.
The safety belt and the driver's door are
opened when the vehicle is standing.
▷
The system has not detected objects for an
extended period, e.g., on a road with very lit‐
tle traffic without road edge line markings.
▷
Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx. 1 mph/
▷
The radar sensor is dirty.
1
km/h.
▷
Each time the rocker switch is pressed past
the point of resistance, the desired speed
increases or decreases by a maximum of
Maintaining/storing the speed
Press the button.
5
mph/10 km/h. Max. adjustable speed:
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
110 mph/180 km/h.
Hold the rocker switch in position to repeat the
action.
It is displayed in the speedometer and briefly
displayed in the instrument cluster, Displays in
the instrument cluster, refer to page 104.
Distance
Selecting a distance
Adjust the distance according to the traffic
and weather conditions; otherwise, there is the
danger of an accident occurring. Maintain the
prescribed safety distance.◀
Maintaining, storing or changing the
speed
The rocker switch can be pressed while the sys‐
tem is interrupted to maintain and store the cur‐
rent speed.
Reduce distance
Adapting the desired speed
Press the button repeatedly until the
desired distance is set.
Adapt the desired speed to the road con‐
ditions and be ready to brake at all times; other‐
103
Online Edition for Part no. 01 41 2604541 - 03 10 500
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 528i, BMW 528xi, BMW 535i, BMW 535xi, BMW 550i, BMW 550xi, BMW F10 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 3.5 out of 4)
Automotive readers have rated 2011 BMW 5-Series 528i 535i 550i F10 Sedan Owners Manual 3.5 out of 4.0 based on 2 product reviews. Good to have