and can lead to tire failure. Under-inflation also
reduces fuel efficiency and tire tread life, and
may affect the vehicle's handling and stopping
ability. Please note that the TPMS is not a sub‐
stitute for proper tire maintenance, and it is the
driver's responsibility to maintain correct tire
pressure,evenifunder-inflationhasnotreached
the level to trigger illumination of the TPMS low
tire pressure telltale. Your vehicle has also been
equipped with a TPMS malfunction indicator to
indicate when the system is not operating prop‐
erly. The TPMS malfunction indicator is com‐
bined with the low tire pressure telltale. When
thesystemdetects a malfunction, thetelltale will
flash for approximately one minute and then re‐
main continuously illuminated. This sequence
will continue upon subsequent vehicle start-ups
as long as the malfunction exists. When the mal‐
function indicator is illuminated, the system may
not be able to detect or signal low tire pressure
as intended. TPMS malfunctions may occur for
a variety of reasons, including the installation of
replacement or alternate tires or wheels on the
vehicle that prevent the TPMS from functioning
properly. Always check the TPMS malfunction
telltale after replacing one or more tires or
tire inflation pressure and after every tire or
wheel change.
System limits
Sudden tire damage
Sudden serious tire damage caused by
external influences cannot be indicated in ad‐
vance.◀
A natural, even pressure loss in all four tires can‐
not be detected.
The system could be delayed or malfunction in
the following situations:
▷
▷
When the system has not been initialized.
When driving on a snowy or slippery road
surface.
▷
▷
Sporty driving style: slip in the drive wheels,
high lateral acceleration.
When driving with snow chains*.
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detec‐
tion of a flat tire. Initialization is started by con‐
firming the inflation pressures.
wheels on your vehicle to ensure that the re‐
placement or alternate tires and wheels allow
the TPMS to continue to function properly.
Do not initialize the system when driving with
snow chains*.
1.
2.
3.
4.
5.
6.
"Vehicle Info"
"Vehicle status"
FTM Flat Tire Monitor*
"Reset"
The concept
Start the engine - do not drive away.
Start the initialization with "Reset".
Drive away.
The system detects a pressure loss on the basis
of speed differences between the individual
wheels while driving.
The initialization is completed while driving,
which can be interrupted at any time.
In the event of a pressure loss, the diameter and
therefore the rotational speed of the corre‐
sponding wheel change. This is detected and
reported as a flat tire.
The initialization automatically continues when
driving resumes.
Indication of a flat tire
Functional requirements
The yellow warning lamp and the vehicle
symbol light up. A message appears on
the Control Display. In addition, a signal
sounds.
The system must have been initialized when the
tire inflation pressure was correct; otherwise,
reliable signaling of a flat tire is not ensured. In‐
itialize the system after each correction of the
91
Online Edition for Part no. 01 41 2604541 - 03 10 500
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 528i, BMW 535i, BMW 550i, BMW F10 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 3.5 out of 5)
Automotive readers have rated 2011 BMW 5-Series 528i 535i 550i F10 Sedan Owners Manual 3.5 out of 5.0 based on 4 product reviews. Don't have any comments before seeing it. Lovely website though,
Holy crap, I didn't see anything to review yet.
Name and email states optional but its not
The GPS does not street names as you go
Does this manual also apply to the 2012 model?