2011 BMW 7-Series ActiveHybrid 7 L F01 F02 Owners Manual

your service center if you are unfamiliar with
them or they are not described here.
Front lamps, bulb replacement
At a glance
You can obtain a selection of replacement bulbs
at your service center.
Danger of burns
Only change bulbs when they are cool;
otherwise, there is the danger of getting
burned.◀
Working on the lighting system
When working on the lighting system, you
should always switch off the lights affected to
prevent short circuits.
1
2
3
4
Adaptive light control
Parking lamp, daytime running lights*
Low beams/high beams
Turn signal
To avoid possible injury or equipment damage
when replacing bulbs, observe any instructions
provided by the bulb manufacturer.◀
Do not touch the bulbs
Do not touch the glass of new bulbs with
your bare hands, as even minute amounts of
contamination will burn into the bulb's surface
and reduce its service life.
Xenon headlamps
Because of the long life of these bulbs, the like‐
lihood of failure is very low. Switching the lamps
on and off frequently shortens their life.
Use a clean tissue, cloth or something similar, or
hold the bulb by its base.◀
If a xenon bulb fails, switch on the front fog lamps
and continue the trip with great care. Comply
with local regulations.
Light-emitting diodes (LEDs)
Do not perform work/bulb replacement on
xenon headlamps
Light-emitting diodes installed behind a cover
serve as the light source for controls, display el‐
ements and other equipment.
Have any work on the xenon lighting system, in‐
cluding bulb replacement, performed only by a
service center.
These light-emitting diodes, which are related
to conventional lasers, are officially designated
as Class 1 light-emitting diodes.
Due to the high voltage present in the system,
there is the danger of fatal injuries if work is car‐
ried out improperly.◀
Do not remove the covers
Do not remove the covers, and never stare
into the unfiltered light for several hours; other‐
wise, irritation of the retina could result.◀
For checking and adjusting headlamp aim,
please contact your BMW center.
Turn signals, incl. side indicators
Headlamp glass
Follow the general instructions on lamps and
bulbs, refer to page 236.
Condensation can form on the inside of the ex‐
ternal lamps in cool or humid weather. When the
light is switched on, the condensation evapo‐
rates after a short time. The headlamp glasses
do not need to be changed.
These lamps are made using LED technology.
Please contact your service center in the event
of a malfunction.
If there is a large amount of moisture, e.g., water
droplets form in the lamp, have it checked by
your service center.
237
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
Product Specification
CategoriesBMW 7-Series Manuals, BMW Manuals
Tags, ,
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 280 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2011 BMW 7-Series ActiveHybrid 7 L F01 F02 Owners Manual 4.5 out of 5.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2011 BMW 7-Series ActiveHybrid 7 L F01 F02 Owners Manual SKU UPC Model
rc on Jun 19, 2015.

good content but I need to take a look


stanislav on Dec 29, 2012. bmw

6