width, refer to page 50, completely. Do not
change the backrest width again and do not call
up a memory position.
Note
Manufacturer's information for LATCH
child restraint fixing systems
Backrest width for the child seat
To mount and use the LATCH child restraint fix‐
ing systems, observe the operating and safety
information from the system manufacturer; oth‐
erwise, the level of protection may be re‐
duced.◀
Before installing a child restraint fixing
system in the front passenger seat, the backrest
width must be opened completely. Do not
change the adjustment after this; otherwise, the
stability of the child seat will be reduced.◀
Mounts for the lower LATCH anchors
Child seat security
Correctly engage the lower LATCH an‐
chors
Make sure that the lower LATCH anchors have
properly engaged and that the child restraint fix‐
ing system is resting snugly against the back‐
rest; otherwise, the degree of protection offered
may be reduced.◀
The rear safety belts and the front passenger
safety belt can be locked against pulling out for
mounting the child restraint fixing systems.
Locking the safety belt
1.
2.
Pull out the belt webbing completely.
Mounts for the lower LATCH anchors are lo‐
cated in the gap between the seat and backrest.
Secure the child restraint fixing system with
the belt.
Before mounting the LATCH child restraint fix‐
ing system, pull the belt away from the child re‐
straint fixing system.
3.
Allow the belt webbing to be pulled in and
pull it taut against the child restraint fixing
system. The safety belt is locked.
Mounting LATCH child restraint fixing
systems without power rear seats
Unlocking the safety belt
1.
2.
3.
Unbuckle the belt buckle.
1.
Mount the child restraint fixing system; refer
to the operating instructions of the system.
Remove the child restraint fixing system.
Allow the belt webbing to be pulled in com‐
pletely.
2.
Make sure that both lower LATCH anchors
have properly engaged and that the child re‐
straint fixing system is resting snugly
against the backrest.
LATCH child restraint fixing
system
Mounting LATCH child restraint fixing
systems on power rear seats*
LATCH: Lower Anchors and Tether for CHil‐
dren.
1.
Before mounting, adjust the seats to their
basic position, refer to page 53.
63
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW ActiveHybrid, BMW F01, BMW F02 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2011 BMW 7-Series ActiveHybrid 7 L F01 F02 Owners Manual 4.5 out of 5.0 based on 2 product reviews. good content but I need to take a look
6