With the transmission position M/S
selected, the manual mode remains
Atypically rapid flashing of the indicator
lamp indicates that a turn signal bulb
active.<
needs to be replaced.<
Signaling briefly
Press lever to resistance point and hold for as
long as you wish to signal.
Triple turn signal activation
Press the lever up to the resistance point. The
turn signal flashes three times.
You can activate or deactivate this function.
>
>
Upshifting: pull on one of the shifting pad-
dles, arrows +.
1.
2.
3.
"Settings"
"Lighting"
Downshifting: press on one of the shifting
paddles, arrows –.
"Triple turn signal"
Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
selected gear is briefly displayed in the instru-
ment panel, followed by the current gear.
Turn signals/headlamp
flasher/high beams
Triple turn signal activation is activated and
is stored for the remote control currently in use.
Washer/wiper system
1
2
3
High beams
Headlamp flasher
Turn signals
1
2
3
Switching on wipers
Switching off wipers or brief wipe
Using turn signals
Activating/deactivating intermittent wipe or
the rain sensor
Press the lever beyond the resistance point.
To switch off manually, press the lever up to the
resistance point.
4
Cleaning windshield and headlamps*
65
Online Edition for Part no. 01 41 2 604 027 - © 03/10 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW E72, BMW X5 xDrive35d, BMW X5 xDrive35i, BMW X5 xDrive50i, BMW X6 xDrive 35i, BMW X6 xDrive 50i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)