The ignition switches off automatically* if the
driver's door is opened. Pressing the Start/Stop
button again switches the ignition back on.
For example, the ignition is not switched off in
the following situations:
>
>
The brakes are actuated
The low beams are switched on
Starting engine
Remote control in ignition lock or with Comfort
Access in vehicle, refer to page 35.
Do not run the engine in enclosed areas,
otherwise the inhalation of toxic exhaust
gases can cause loss of consciousness and
death. The exhaust gases contain carbon mon-
oxide, an odorless and colorless, but highly
toxic gas.
Never leave an unattended vehicle with the
engine running, as such a vehicle represents a
potential safety hazard.
1.
2.
Depress brake pedal.
Press the Start/Stop button.
The system responds by automatically engag-
ing the starter for a certain period and automat-
ically disengaging it as soon as the engine
starts.
Diesel engine
To prevent the vehicle from rolling, always
engage transmission position N or P and set the
parking brake before leaving the vehicle with
the engine running.<
When the engine is cold and at temperatures
below approx. 327/06 the starting process
may be somewhat delayed due to automatic
preglowing. The preglowing indicator lamp in
the instrument panel lights up. A message
appears on the Control Display.
Do not allow the engine to warm up by leaving it
running while the vehicle remains stationary.
Instead, begin to drive at a moderate engine
speed.
The engine starts when you depress the
brake pedal while pressing the Start/Stop
button.<
Switching off engine
When leaving the vehicle, always take
along the remote control.
Set the parking brake firmly when parking; oth-
erwise, the vehicle could roll.<
Avoid frequent starting in quick succes-
sion or repeated starting attempts in
which the engine does not start. Otherwise, the
fuel is not burned or inadequately burned and
there is a danger of overheating and damaging
the catalytic converter.<
Procedure
1.
Engage transmission position P with the
vehicle stationary.
2.
3.
4.
Press the Start/Stop button.
Set the parking brake.
Remove the remote control from the igni-
tion lock, refer to page 58.
Before driving into a car wash
The vehicle can roll if you proceed according to
the following steps:
59
Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG
Product Specification
Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
---|---|
Tags | BMW E70, BMW E71, BMW E72, BMW X5 xDrive35d, BMW X5 xDrive35i, BMW X5 xDrive50i, BMW X6 xDrive35i, BMW X6 xDrive50i |
Model Year | 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |