Technology for comfort, convenience and
safety
PDC Park Distance Control*
Limitations of ultrasonic measurement
The detection of objects can come up against
the limitations of physical ultrasonic measure-
ment, for example:
The concept
In addition to the PDC Park Distance Control,
the rear view camera*, refer to page 93, can >
When using tow bars and towing hitches
also be switched on.
>
In the presence of thin or wedge-shaped
objects
PDC assists you during parking. A slow
approach to an object in front of or behind your
vehicle is announced by:
>
In the presence of low objects
>
In the presence of objects with corners and
sharp edges
>
>
Signal tones
Optical displays
Low objects that have already been displayed,
e.g. curbs, can disappear again from the detec-
tion area of the sensors before or after a contin-
uous tone sounds.
Measurement
Ultrasonic sensors in the bumpers carry out the
measurement.
Higher, protruding objects, e.g. ledges, cannot
be detected.
Their range is approx. 7 ft/2 m.
The acoustic warning begins:
False warnings
>
At approx. 24 in/60 cm for the front* sen-
Under the following conditions, PDC may dis-
play a warning even though no obstacle is
present in the detection range:
sors and the two rear corner sensors.
>
At approx. 5 ft/1.50 m for the middle sen-
sors in the rear.
>
>
In heavy rain
System limitations
When the sensors are heavily soiled or iced-
over
PDC cannot replace the personal assess-
ment of the traffic situation. Also make a >
When the sensors are covered with snow
On rough road surfaces
direct visual check of the traffic situation around
the vehicle. Otherwise, there could be a risk of
accident, for example due to other road users or
>
>
In large, rectangular buildings with smooth
walls, e.g. underground garages
objects outside the detection range of PDC.
Loud sources of sound, inside and outside the >
In the presence of heavy exhaust
vehicle, could drown out the PDC signal tone.<
>
Due to the presence of other ultrasonic
sources such as street sweepers, steam
cleaners, or neon lamps.
Avoid approaching an object too quickly.
Avoid starting off quickly while PDC is not
yet activated.
Automatic activation
Otherwise, physical circumstances could cause
the system to issue a warning late.<
With the engine running or the ignition switched
on, shift the selector lever into position R.
Automatic deactivation
The system switches off and the LED goes out:
88
Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW E72, BMW X5 xDrive35d, BMW X5 xDrive35i, BMW X5 xDrive50i, BMW X6 xDrive35i, BMW X6 xDrive50i |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)