Service products and capacities
310
Coolant
overheating. In the Service Booklet, you can
find information on the intervals for renewal.
Important safety notes
The renewal interval is determined by the
coolant type and the cooling system design.
The renewal interval in the Service Booklet is
only valid if the coolant is added or renewed
with Mercedes-Benz approved products.
Therefore, only use MB 326.0 antifreeze/
corrosion inhibitor or another Mercedes-Benz
approved product of the same specification.
The coolant is a mixture of water and
antifreeze/corrosion inhibitor. It performs
the following tasks:
Ranti-corrosion protection
Rantifreeze protection
Rraising the boiling point
The cooling system is filled with coolant at the Information on other Mercedes-Benz
factory which contains antifreeze/corrosion approved products of the same specification
inhibitor that ensures protection down to
approximately -35 ‡ (-37 †).
can be obtained at any authorized Mercedes-
Benz Center or on the Internet at
http://bevo.mercedes-benz.com.
The coolant is checked at every service date
at an authorized Mercedes-Benz Center.
!
with the desired antifreeze protection. You
could otherwise damage the engine.
Only add coolant that has been premixed
The antifreeze/corrosion inhibitor
concentration in the cooling system should:
Further information on coolants and on
filling can be found in the Mercedes-Benz
Specifications for Service Products, MB
Approval 310.1, e.g. on the Internet at
http://bevo.mercedes-benz.com. You
can also consult an authorized Mercedes-
Benz Center.
Rbe at least 50%. This will protect the cooling
system against freezing down to around
-35
‡ (-37 †).
Rnot exceed 55% (antifreeze protection
down to -49 ‡ (-45 †); otherwise, heat will
not be dissipated as effectively.
!
Always use a suitable coolant mixture,
even in countries where high temperatures If the coolant level is too low, MB 326.0
prevail.
antifreeze/corrosion inhibitor should be
added. Have the cooling system checked for
leaks.
Otherwise, the cooling system will not be
sufficiently protected from corrosion, and
the boiling point will be too low.
If the coolant has antifreeze protection down
to -35 ‡ (-37 †), the boiling point of the
coolant in the pressurized system is
approximately 266 ‡ (130 †).
Windshield and headlamp cleaning
system
G Warning
Your vehicle has a range of aluminum
components. Use of aluminum components
in the engine make it necessary to specifically
match the antifreeze/corrosion inhibitor in
these systems in order to protect the
aluminum parts. Using other antifreeze/
corrosion inhibitors without these
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/
antifreeze on hot engine parts, because it may
ignite and burn. You could be seriously
burned.
X Use MB Windshield Washer Concentrate
MB SummerFit.
characteristics affects the service life.
The coolant must be used throughout the year X At temperatures above freezing: add 1
in order to maintain the necessary corrosion
protection and provide protection from
part MB SummerFit to 100 parts water, e.g.
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C250, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-Benz C63 AMG, Mercedes-Benz W204 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(6 votes, average: 4.83 out of 5)
Automotive readers have rated 2011 Mercedes-Benz C250 C300 C350 4MATIC C63 AMG W204 Owners Manual 4.8 out of 5.0 based on 6 product reviews. Excellent site, useful for persons needing more understanding of c-class models
Very good, if I will downaload it, thanks! But why your website first ask write good review, and then you let download?
Engine temperature need to check with owner manual
it's a very useful documents, when u lost your user manual!it's a very useful documents, when u lost your user manual!
userful documents, when you get lost your manual
Comments are closed.