Occupant safety
54
Belt warning for driver and front
passenger
or
Rthe vehicle is stationary and a door is open.
Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the7 seat belt warning lamp
lights up for six seconds each time the engine
is started. It then goes out once the driver and
the front passenger have fastened their seat
belts.
i For more information on the7 seat
belt warning lamp, see "Indicator and
warning lamps in the instrument cluster,
seat belt" (Y page 204).
Emergency Tensioning Devices and
seat belt force limiters
If the driver's seat belt is not fastened after
the engine is started, an additional warning
tone will sound. The warning tone goes out
after approximately six seconds or once the
driver's seat belt is fastened.
If, after six seconds, the driver or front-
passenger have not fastened their seat belts
and the doors are closed:
The front seat belts and the outer seat belts
in the rear are equipped with ETDs and belt
force limiters.
! If the front-passenger seat is not
occupied, do not engage the seat belt
tongue in the buckle on the front-
passenger seat. Otherwise, the Emergency
Tensioning Device could be triggered in the
event of an accident.
Rthe7 seat belt warning lamp remains
illuminated as long as either the driver's or
front-passenger seat belt is not fastened.
The ETDs tighten the seat belts in an accident,
pulling them close against the body.
ETDs do not correct incorrect seat positions
or incorrectly fastened seat belts.
ETDs do not pull vehicle occupants back
towards the backrest.
Seat belt force limiters, when activated, are
employed to help reduce the force exerted by
the seat belts on occupants during a crash.
Rif the vehicle speed exceeds 15 mph
(25
km/h), the7 seat belt warning
lamp lights up. Additionally, a warning tone
will sound with increasing intensity for a
maximum of 60 seconds or until the
driver's and front-passenger seat belt are
fastened.
If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
The front belt force limiters are synchronized
seat belt warning lamp lights up and a with the front air bags, which take on a part
7
warning tone sounds again.
The warning tone ceases even if the driver or exerted on the occupant is distributed over a
front passenger have still not fastened their
greater area.
of the deceleration force. Thus, the force
seat belt after 60 seconds. The7 seat belt The ETDs can only be activated if:
warning lamp stops flashing but remains
Rthe ignition is switched on.
illuminated.
Rthe restraint systems are operational; see
"SRS warning lamp" (Y page 34).
After the vehicle comes to a standstill, the
warning tone is reactivated and the7 seat
Rthe belt tongue is engaged in the buckle on
belt warning lamp flashes again if the vehicle
each of the lap-shoulder belts in the front.
speed again exceeds 15 mph (25 km/h) .
The7 seat belt warning lamp only goes
out if:
Rthe front-passenger seat is occupied and
the belt tongue is engaged in the buckle on
the front-passenger side.
Rboth the driver and the front passenger
have fastened their seat belts.
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C250, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-Benz C63 AMG, Mercedes-Benz W204 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(6 votes, average: 4.83 out of 5)
Automotive readers have rated 2011 Mercedes-Benz C250 C300 C350 4MATIC C63 AMG W204 Owners Manual 4.8 out of 5.0 based on 6 product reviews. Excellent site, useful for persons needing more understanding of c-class models
Very good, if I will downaload it, thanks! But why your website first ask write good review, and then you let download?
Engine temperature need to check with owner manual
it's a very useful documents, when u lost your user manual!it's a very useful documents, when u lost your user manual!
userful documents, when you get lost your manual
Comments are closed.