Driving your vehicle
The LDWS does not operate
when:
The LDWS may not warn you even • The distance from vehicle ahead is
if the vehicle leaves the lane, or
may warn you even if the vehicle
does not leave the lane when:
• The lane can't be visible due to snow,
rain, stain, a puddle or many other
things.
very short or the vehicle ahead drives
hiding the lane line.
•
The driver turns on the turn signal to
change lane.
• The vehicle shakes heavily.
•
The
decreases or the lane lines are cross-
ing complicatedly.
lane
number
increases
or
But, when the hazard warning flasher
is operating, the LDWS operates nor-
mally.
•
Putting something on the dashboard.
•
•
Operating the wiper switch with HI
mode due to heavy rain.
Driving on the lane line.
• The brightness of the outside changes
suddenly.
• Driving with the sun in front of you.
• Driving in areas under construction.
• The lane line is more than two.
• Not turning on the headlight even at
night or in the tunnel.
✽
To change lane, operate the turn signal
switch then change the lane.
NOTICE
• Difficult to distinguish the color of the
lane from the road.
•
•
Driving on a steep grade or a curve.
Light reflects from the water on the
road.
•
•
The lens or windshield is stained with
foreign matter.
The sensor cannot detect the lane
because of fog, heavy rain or heavy
snow.
•
The surrounding of the inside rear view
mirror temperature is high due to a
direct ray of light.
•
•
•
The lane is very wide or narrow.
The lane line is damaged or indistinct.
The shadow is on the lane line by a
median strip.
•
•
There is a mark similar to a lane line.
There is a boundary structure.
5
57
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)