6
DO-IT-YOURSELF MAINTENANCE
CHECKING THE CLIMATE
CONTROL AIR FILTER
20
G140D01A-GAT
Checking the Compressor Drive
Belt
B145A03HR-GAT
(For Evaporator and Blower
Unit) (If Installed)
NOTE:
o If you clean the filter with water,
dry it in the open air.
o When cleaning the filter, be care-
ful that the filter doesn’t drop or
bump against other objects, or
damage may result.
Theclimatecontrolairfilterislocatedin
thehood.
It helps to decrease the amount of
pollutants entering the car.
Tension
pulley
COMP. pulley
G140D01HR
Crankshaft pulley
Whentheairconditioningisbeingused
regularly, the compressor drive belt
tension should be checked at least
once a month.
To check the drive belt tension, press
down on the belt halfway between the
engine crankshaft and compressor
pulleys. Pressing with your finger, you
should not be able to deflect this belt
anymore than 8.0 mm. If you have the
instruments to check it with a force of
B145A01HR
1.
2.
Open the hood.
Remove the filter by pressing the
upper end of the filter.
Clean the filter with compressed air
orwater.
Reassemble in the reverse order of
disassembly after the filter is com-
pletelydried.
3.
4.
98N
(22 lb.), the deflection should be
approx.8.0mm(0.315in.).Ifthebeltis
too loose, have it adjusted by your
Hyundaidealer.
| Categories | Hyundai Manuals, Hyundai H-100 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, H-100 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)