Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
D250000AEN
• For maximum defrosting, set the tem-
perature control to the extreme
WARNING - Windshield
right/hot position and the fan speed
control to the highest speed.
If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up the
inside of the windshield.
heating
•
•
Do not use the
or
position
during
cooling
operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility could
cause an accident resulting in seri-
ous injury or death. In this case, set
the mode selection knob or button
OBH049103
D250201AEN-EU
To defog inside windshield
to the
position and fan speed
1.
2.
3.
4.
Select desired fan speed.
Select desired temperature.
Press the defrost button (
The outside (fresh) air position will be
selected automatically.
control knob or button to a lower
speed.
✽ NOTICE
).
If the engine temperature is still cold
after starting, then a brief engine warm
up period may be required for the vent-
ed air flow to become warm or hot.
If the outside (fresh) air position is not
selected automatically, adjust the corre-
sponding button manually.
If the
position is selected, lower fan
speed is adjusted to a higher fan speed.
4
101
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)