Maintenance
G070101AUN
Recommended engine coolant
•
When adding coolant, use only deion-
ized water or soft water for your vehicle
and never mix hard water in the
coolant filled at the factory. An improp-
er coolant mixture can result in serious
malfunction or engine damage.
•
The engine in your vehicle has aluminum
engine parts and must be protected by
an ethylene-glycol-based coolant to pre-
vent corrosion and freezing.
OBH071004
• DO NOT USE alcohol or methanol
coolant or mix them with the specified
coolant.
• Do not use a solution that contains
more than 60% antifreeze or less than
OBH072005L
Check the condition and connections of
all cooling system hoses and heater
hoses. Replace any swollen or deterio-
rated hoses.
The coolant level should be
between F and L
marks on the side of the
coolant reservoir when the
engine is cool.
If the coolant level is low, add enough
distilled (deionized) water. Bring the level
to F, but do not overfill. If frequent addi-
tions are required, see an authorized
HYUNDAI dealer for a cooling system
inspection.
WARNING
Radiator cap
35%
antifreeze, which would reduce
the effectiveness of the solution.
For mixture percentage, refer to the fol-
lowing table.
filled
Do not remove the radiator cap
when the engine and radiator are
hot coolant and
steam may blow out under pres-
sure causing serious injury.
Mixture Percentage (volume)
Ambient
hot. Scalding
Temperature
Antifreeze
Water
5°F (-15°C)
-13°F (-25°C )
-31°F (-35°C)
-49°F (-45°C)
35
40
50
60
65
60
50
40
7
19
Product Specification
Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Genesis |
Document File Type | |
Copyright | Attribution Non-commercial |