2013 Hyundai Santa Fe Owners Manual

Features of your vehicle
Charging System
Warning Light
Engine Coolant
Temperature Warning
Light (if equipped)
CAUTION - Diesel Engine
If   the    Malfunction    Indicator
Lamp  (MIL)  blinks,  some error
related to  the injection quantity
adjustment occurs  which could
result  in loss  of  engine power,
combustion    noise   and   poor
emission.
In this case, we recommend that
you   have  the   engine   control
system inspected by  an author-
ized HYUNDAI dealer.
This warning light illuminates:
Once you set the ignition  switch or
This warning light illuminates:
Engine Start/Stop Button to the ON    •  When the engine coolant tempera-
position.
ture is  above 120°C  (248°F). This
means that the engine is overheat-
ed and may be damaged.
If your  vehicle is overheated,  refer
to “Overheating” in chapter 6.
- It  remains on  until  the  engine  is
started.
•  When there  is  a malfunction  with
either  the  alternator   or  electrical
charging system.
CAUTION - Engine
Overheating
Do not continue driving with the
engine   overheated.  Otherwise
engine may be damaged.
If there is a malfunction with either the
alternator or electrical charging system:
1.
Drive carefully to  the nearest safe
location and stop your vehicle.
2.
Turn the engine  off and check  the
alternator drive  belt for looseness
or breakage.
If  the   belt  is  adjusted   properly,
there  may  be  a  problem   in  the
electrical charging system.
In this  case, we  recommend  that
you have the vehicle inspected  by
an authorized HYUNDAI dealer as
soon as possible.
4
88
Product Specification
Categories Hyundai Manuals, Hyundai Santa Fe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 711 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Santa Fe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field