2013 Hyundai Santa Fe Owners Manual

Maintenance
3.
4.
Insert  a new  bulb into  the socket     Front fog lamp  bulbs/cornering
and  rotating  it  until  it  locks  into     lamp  (if equipped)
place.
Install the  socket in  the assembly
by aligning the  tabs on the socket
with  the   slots  in   the  assembly.
Push the socket into the assembly
and turn the socket clockwise.
TTuurrnn  ssiiggnnaall
PPoossiittiioonn
llaammpp
ODMEMC2006
Turn signal lamp/Position lamp
1.
Remove   the    socket   from   the
assembly  by   turning  the  socket
counterclockwise until the  tabs on
the socket  align with  the slots  on
the assembly.
Remove the  bulb from  the socket
by  pressing  it  in  and   rotating  it
counterclockwise until the  tabs on
the bulb align  with the slots in  the
socket.  Pull  the  bulb  out  of   the
socket
ODMEMC2008
1.
2.
3.
4.
Remove  the  front  bumper  under
cover.
Reach your  hand into the  back of
the front bumper.
Disconnect  the  power  connector
from the socket.
Remove the  bulb-socket from  the
housing   by   turning   the  socket
counter clockwise until the tabs on
the socket  align with  the slots  on
the housing.
2.
7
90
Product Specification
Categories Hyundai Manuals, Hyundai Santa Fe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 711 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Santa Fe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field