Maintenance
5.
Install the new bulb-socket into the Headlamp (HID type), position
housing by aligning the tabs on (LED), turn signal, and front fog
the socket with the slots in the lamp bulb, daytime running,
housing. Push the socket into the cornering lamp replacement
housing and turn the socket clock-
✽ NOTICE
HID lamps have superior perform-
ance vs. halogen bulbs. HID lamps
are estimated by the manufacturer
If the light bulb does not operate, we to last twice as long or longer than
recommend that the system be halogen bulbs depending on their
checked by an authorized HYUNDAI frequency of use. They will probably
require replacement at some point
in the life of the vehicle. Cycling the
headlamps on and off more than
typical use will shorten HID lamps
life. HID lamps do not fail in the
same manner as halogen incandes-
cent lamps. If a headlamp goes out
after a period of operation but will
immediately relight when the head-
lamp switch is cycled it is likely the
HID lamp needs to be replaced. HID
lighting components are more com-
plex than conventional halogen
bulbs thus have higher replacement
cost.
wise.
6.
7.
Connect the power connector to
the socket.
Reinstall the front bumper under
cover.
dealer.
WARNING - HID
Headlamp low beam
(if equipped)
Do not attempt to replace or
inspect the low beam (XENON
bulb) due to electric shock dan-
ger. If the low beam (XENON
bulb) is not working, we recom-
mend
that
the
system be
authorized
checked
by
an
HYUNDAI dealer.
7
91
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)