2014 Tesla Model S Owners Manual North America

Temporary Tire Repair
Inflating with Air Only
If you have a Tesla tire repair kit, follow these
steps to inflate a tire with air:
1.
Detach the power supply connector from
the rear of the compressor and plug it into
the 12V power socket located in Model S
on the front of center console.
Caution: To avoid overheating, do not use
the compressor continuously for more
than eight minutes. Allow the compressor
to cool for 15 minutes between uses.
Caution: The compressor runs slowly
when overheated from excessive use.
Turn it off and allow it to cool.
2.
3.
Release the black air hose from the
compressor.
Attach the air hose to the valve and press
the lever down to secure it in place.
4.
5.
6.
Ensure the compressor is lying on a level
surface with the pressure gauge facing to
the side where you can read it.
To add air, turn on the compressor and
inflate until the desired pressure is
reached.
To release air, turn off the compressor,
then press and hold the red button until
the desired pressure is reached.
Note: For your convenience, the tire repair kit
includes a selection of adapters that allow you
to inflate other items. These adapters are
located in a compartment on the back of the
compressor.
Maintenance
107
Product Specification
CategoriesTesla, Tesla Model S
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 159 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandTesla, Model S
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field