Tesla Built-In Rear Facing Child Seats
Usage Restrictions
The optional Tesla built-in rear facing child
seats are child restraint systems and must
only be used for children over 37" (94 cm) tall
and weighing between 35 and 77 lbs (16.2 to
35.2
kg).
Always ensure the top of the child’s head
cannot contact the vehicle and that the child
is seated comfortably with the seat belts
positioned and latched correctly. The child’s
pelvis must be held securely in place by the
lap belt. Follow all instructions provided and
do not use supplemental child safety seats in
these seats.
4.
Pull the handle to release the head
supports from the seat back, then pull the
head supports toward you to unfold them.
Note: Whenever a child is seated in the Tesla
built-in rear facing child seats, it is
recommended that you set the climate control
system to draw outside air into Model S
instead of recirculating the air. This draws
more air into the rear seating areas.
Opening
1.
Remove the cover from the trunk floor
and pull the strap to lift the seat assembly
upward.
5.
Raise the seat back to the upright position
and push until it locks into position.
Visually check to ensure that the retaining
catches are engaged.
2.
Push the seat assembly into position.
6.
Check that the seat back and seat base
are securely retained in the upright
position by trying to pull the seat back
toward you.
Folding
Caution: Before folding the seats, fasten
the seat belts to prevent them from
getting trapped in the seat mechanism
and being damaged.
3.
Undo the Velcro strap.
1.
Pull the handle to release the seat back
and pull the seat back fully forward.
Seating and Safety Restraints
27
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)