Safety Information
Seating a Child
remain positioned over the child’s
shoulders.
The Tesla built-in rear facing child seats are
child restraint systems and are approved to
United Nations ECE Regulation R44.04
standards for use by children in Mass Groups II
and III, weighing 15 - 36 kg. These seats must
only be used for children who are between 3
and 12 years old, and 98 - 135 cm tall.
Always ensure the top of the child’s head
cannot contact the vehicle and that the child
is seated comfortably with the seat belts
positioned and latched correctly. The child’s
pelvis must be held securely in place by the
lap belt. Follow all instructions provided and
do not use supplemental child safety seats in
these seats.
Note: Whenever a child is seated in the Tesla
built-in rear facing child seats, it is
recommended that you set the climate control
system to draw outside air into Model S
instead of recirculating the air. This draws
more air into the rear seating areas.
1.
Position the child in the seat with arms
through the loops of the seat belts.
2.
3.
Connect the two halves of the seat belt
tongue.
Insert the seat belt tongue latch into the
buckle and ensure it is securely fastened.
To release, press the button on the buckle,
and separate the two halves of the seat
restraint.
4.
5.
Adjust the shoulder belts so they run over
the top of the child’s shoulders and away
from the face.
Adjust the length of the buckle to ensure
the lower straps sit low on the child’s
pelvis. The child’s pelvis must be held
firmly in place.
6.
7.
Pull the lower straps until the child is
securely held in the seat.
Slide the shoulder clips into place to
ensure the upper portion of the belts
Safety Information
17
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Quick Reference Guide |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)