Features of your vehicle
4.
Press and hold the just-trained Standard programming
HomeLink® button and observe
5. Press and hold the just-trained
HomeLink® button and observe
the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your device should activate when
the HomeLink® button is pressed
and released.
To train most devices, follow these
the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your device should activate.
To program the remaining two
HomeLink® buttons, follow either
steps 1 through 4 above for other
Rolling Code devices or steps 2
through 5 in Standard Programming
for standard devices.
instructions:
1.
For first-time programming, press
and hold the two outside buttons,
HomeLink ®
Channel
1
and
5.
Channel 3 Buttons, until the indi-
cator light begins to flash (after 20
seconds). Release both buttons.
Do not hold the buttons for longer
than 30 seconds.
6. To program the remaining two
HomeLink® buttons, follow steps 2
through 5.
2.
3.
4.
Position the end of your hand-held
transmitter 1-3 inches (2-8 cm)
away from the HomeLink® buttons
while keeping the indicator light in
view.
Simultaneously press and hold
both the HomeLink® and hand-
held transmitter button. DO NOT
release the buttons until step 4
has been completed.
While continuing to hold the but-
tons the red Indicator Status LED
will flash slowly and then rapidly
after
HomeLink ®
successfully
trains to the frequency signal from
the hand-held transmitter. Release
both buttons.
4
46
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)