What to do in an emergency
Distributing the sealant
Checking the tire inflation pres- ✽ NOTICE
sure
11.
Immediately drive approximately
7~10 km (4~6 miles or about 10
The pressure gauge may show high-
er than actual reading when the
compressor is running. To get an
accurate tire pressure, the compres-
connection hose (9) of the sor needs to be turned off.
1.After
driving approximately 7~10 km
miles or about 10 minutes),
(4~6
minutes) to evenly distribute the
sealant in the tire.
Do not exceed a speed of 80 km/h
stop at a safety location.
2.Connect
compressor directly to the tire
valve.
(50
mph). If possible, do not fall
below a speed of 20 km/h (12 mph).
- To reduce the inflation pressure:
3.Plug
the compressor power cord
While driving, if you experience any
unusual vibration, ride disturbance or
Loosen the screw cap (8) on the
compressor hose.
into the vehicle power outlet.
noise, reduce your speed and drive 4.Adjust the tire inflation pressure to
the recommended tire inflation.
With the ignition switched on, pro-
ceed as follows.
with caution until you can safely pull
off of the side of the road.
Call for road side service or towing.
When you use the Tire Mobility Kit,
the tire pressure sensors and wheel
may be damaged by sealant, remove
the sealant stained with tire pressure
sensors and wheel and inspect at an
authorized dealer.
- To increase the inflation pressure:
Switch on the compressor, posi-
tion I. To check the current infla-
tion pressure setting, briefly
switch off the compressor.
6
26
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)