What to do in an emergency
Using the Tire Mobility Kit
CAUTION - Tire pressure
1.Detach
the speed restriction label
Do not attempt to drive your
vehicle if the tire pressure is
below 200 kpa (29 psi). This
could result in an accident due
to sudden tire failure.
(0)
from the sealant bottle (1), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driver
not to drive too fast.
2.Screw
connection hose (9) onto
the connector of the sealant bottle.
9.
10.
Switch off the compressor.
3.Ensure
closed.
4.Unscrew
valve of the flat tire and screw fill-
ing hose (2) of the sealant bottle
onto the valve.
that screw cap (8) is
the valve cap from the
Detach the hoses from the
sealant bottle connector and
from the tire valve.
OYN069018
6.Ensure
that the compressor is
Return the Tire Mobility Kit to its stor-
age location in the vehicle.
switched off, position 0.
7.Plug
the compressor power cord
into the vehicle power outlet.
5.Insert
the sealant bottle into the
housing (4) of the compressor so
that the bottle is upright.
WARNING - Carbon
monoxide
8.With
the engine start/stop button
position on or ignition switch posi-
tion on, switch on the compressor
and let it run for approximately 5~7
minutes to fill the sealant up to
proper pressure. (refer to the Tire
and Wheels, chapter 8). The infla-
tion pressure of the tire after filling
Do not leave your vehicle run-
ning in a poorly ventilated area
for extended periods of time.
Carbon monoxide poisoning
and suffocation can occur.
is
unimportant
and
will
be
checked/corrected later.
Be careful not to overinflate the tire
and stay away from the tire when
filling it.
6
25
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)