Convenient features of your vehicle
To Reset the Power Windows
When the power window switch is
pulled up again within five seconds
after the window is lowered by the
automatic reverse function, this func-
tion does not operate.
When the power windows do not nor-
mally operate, the automatic power
window system must be reset as fol-
lows:
1.
Press the Engine Start/Stop but-
ton twice to the ON position.
i Information
2.
Continue pulling up the power win-
dow switch even after fully closing
the windows for one second or
more.
The automatic reverse function for the
driver’s window is only active when
the “auto up” function is used by fully
pulling up the switch. The automatic
reverse function will not operate,
when the window is half open by oper-
ating the Power Window switch.
If the problem persists, have the sys-
tem checked by an authorized
EQUUS dealer.
WARNING
Automatic Reverse
Make sure heads, other body
parts or other objects are not
extended from the windows,
before closing, to avoid injury
or vehicle damage.
Objects, which are less than
0.16
in. (4 mm) in diameter and
caught between the window
and the upper window frame,
may not be detected by the
automatic reverse sensor.Thus,
the window operation will not
be
OVI045604N
automatically
reversed.
stop
and
When a window sensor detects any
obstacle while automatically closing
the window, the window will stop the
upward movement, and then be low-
ered by approximately 12 in (30 cm)
to allow the object to be cleared.
When the window sensor detects the
resistance while pulling up the power
window switch, the window will stop
the upward movement, and then be
lowered by approximately 1 in (2.5
cm).
3-30
| Categories | Hyundai Manuals, Hyundai Equus Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Equus |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)