03
Convenient features of your vehicle
Operating HomeLink®
Erasing HomeLink® buttons
To operate, simply press and release
the programmed HomeLink® button.
An individual programming cannot
be erased. However, to erase all
three programmings;
Activation will occur for the trained
device (i.e. garage door opener, gate
operator, security system, entry door
lock, home/office lighting, etc.). For
convenience, the hand-held transmit-
ter of the device may also be used at
any time.
1.
Press and hold the two outer
HomeLink® buttons until the indi-
cator light begins to flash after 20
seconds; and
2.
Release both buttons. Do not hold
for longer than 30 seconds.
The Integrated HomeLink® Wireless
Reprogramming a single
HomeLink® button
To program a new device to a previ-
ously trained HomeLink® button, fol-
low these steps:
Control System is now in the training
(learning) mode and can be pro-
grammed at any time by following the
appropriate
steps
as
in
the
"Programming".
1.
Press
HomeLink® button. Do NOT release
until the step 4 is completed.
and
hold
the
desired
FCC ID: NZLZTVHL3
IC: 4112A-ZTVHL3
2.
When the indicator light begins to
flash slowly (after 20 seconds),
point the handheld transmitter 1 to
3
inches
away
from
the
HomeLink® surface.
3.
Press and hold the handheld
transmitter button.The HomeLink®
indicator light will flash, first slowly
and then rapidly.
4.
5.
When the indicator light begins to
flash rapidly, release both buttons.
Press and hold the just-trained
HomeLink® button and observe
the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your new device should activate.
3-57
| Categories | Hyundai Manuals, Hyundai Equus Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Equus |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)