Driving your vehicle
Seat belt operating
Malfunction indicator
The seat belt tightens when the vehi-
cle senses a collision.
• The AVSM OFF indicator illumi-
nates, when the Engine Start/Stop
button is pressed ON. However, it
goes OFF in approximately 3 sec-
onds. When the indicator does not
illuminate, or continuously remains
ON even after 3 seconds, with the
Engine Start/Stop button ON, or
when the indicator remains ON
while driving, the AVSM does not
properly operate. Take your vehicle
to an authorized EQUUS dealer
and have the system checked.
WARNING
The AVSM is activated depend-
ing on the vehicle-to-vehicle
distance, relative velocity and
driver's brake pedal/accelerator
operation. Do not recklessly
drive on purpose to activate the
AVSM.
•
The AVSM OFF indicator may illu-
minate, when the ESC indicator or
SCC indicator illuminates. It does
not indicate a malfunction of the
AVSM.
NOTICE
•
•
When the AVSM is activated or
deactivated, make sure that the
vehicle is stopped.
When the engine runs, the AVSM
is automatically turned ON. If
unnecessary, select the AVSM
OFF in the User Settings mode.
Even when the AVSM ON is
selected in the User Settings
mode, but when the ESC is
turned OFF by pressing the ESC
OFF button, the AVSM is auto-
matically deactivated. Then, it is
impossible to manually control
the AVSM.
WARNING
The AVSM is not a substitute for
your safe driving practices, but
only a supplementary system. It
is the driver's responsibility to
always check the speed and the
vehicle-to-vehicle distance.
•
5-56
| Categories | Hyundai Manuals, Hyundai Equus Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Equus |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)