Convenient features of your vehicle
To train rolling code devices, follow 3. Return to the vehicle and firmly Standard programming
these instructions:
press, hold for two seconds and
then release the desired
To train most devices, follow these
instructions:
1.
At the garage door opener receiv-
er (motor-head unit) in the garage,
locate the "learn" or "smart" but-
ton. This can usually be found
where the hanging antenna wire is
attached to the motor-head unit.
Exact location and color of the but-
ton may vary by garage door
HomeLink ® button. Repeat the
1.
For first-time programming, press
and hold the two outside buttons,
"press/hold/release" sequence a
second time to complete the pro-
gramming. (Some devices may
HomeLink ®
Channel
1
and
Channel 3 Buttons, until the indi-
cator light begins to flash (after 20
seconds). Release both buttons.
Do not hold the buttons for longer
than 30 seconds.
require
you
to
repeat
this
sequence a third time to complete
the programming.)
opener brand. If there is difficulty 4. Press and hold the just-trained
locating the training button, refer-
ence the device owner's manual or
please visit our Web site at
www.homelink.com.
HomeLink® button and observe
2.
3.
4.
Position the end of your hand-held
transmitter 1-3 inches (2-8 cm)
away from the HomeLink® buttons
while keeping the indicator light in
view.
Simultaneously press and hold
both the HomeLink® and hand-
held transmitter button. DO NOT
release the buttons until step 4
has been completed.
the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your device should activate.
2.
Firmly press and release the
"learn" or "smart" button (which 5.To program the remaining two
activates the "training light"). You
will have 30 seconds to initiate
step 3.
HomeLink® buttons, follow either
steps 1 through 4 above for other
Rolling Code devices or steps 2
through 5 in Standard Programming
for standard devices.
While continuing to hold the but-
tons the red Indicator Status LED
will flash slowly and then rapidly
after
HomeLink ®
successfully
trains to the frequency signal from
the hand-held transmitter. Release
both buttons.
3-34
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)