Convenient features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
•
For maximum defrosting, set the To defog inside windshield
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
WARNING
Windshield heating
Do not use the
or
posi-
• If warm air to the floor is desired
while defrosting or defogging, set the
mode to the floor-defrost position.
tion during cooling operation in
extremely humid weather. The
difference between the temper-
ature of the outside air and that
of the windshield could cause
the outer surface of the wind-
shield to fog up, causing loss of
visibility could cause an acci-
dent resulting in serious injury
or death. In this case, set the
mode selection knob or button
•
Before driving, clear all snow and
ice from the windshield, rear win-
dow, outside rear view mirrors, and
all side windows.
■
Type A
■ Type B
•
Clear all snow and ice from the
hood and air inlet in the cowl grill to
improve heater and defroster effi-
ciency and to reduce the probability
of fogging up the inside of the wind-
shield.
ODH043100
1. Select desired fan speed.
Select desired temperature.
3. Press the defrost button (
2.
to the
position and fan
).
speed control knob or button to
a lower speed.
4. The outside (fresh) air position will
be selected automatically.
✽
NOTICE
If the outside (fresh) air position is
not selected automatically, adjust the
corresponding button manually.
If the engine temperature is still cold
after starting, then a brief engine
warm up period may be required for
the vented air flow to become warm If the
position is selected, lower
or hot.
fan speed is adjusted to a higher fan
speed.
3-148
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)