2016 Hyundai Tucson Owners Manual

Maintenance
Always handle  them carefully, and
avoid  scratches  and abrasions.  If
the bulbs are lit, avoid contact  with
liquids.
Never  touch  the  glass  with  bare
hands. Residual oil may cause  the
bulb to overheat and burst when lit.
8. Connect the headlamp  bulb sock-
et-connector.
High beam
9.
Install the headlamp bulb cover by
turning it clockwise.
i   Information
The   headlamp    aiming    should   be
adjusted after an accident or after the
headlamp assembly is reinstalled at an
authorized HYUNDAI dealer.
A  bulb  should  be   operated  only
when installed in a headlamp.
If  a   bulb  becomes  damaged   or
cracked,   replace   it  immediately
and carefully dispose of it.
OTLE075014
1.
2.
Open the hood.
Disconnect  the   negative  battery
cable.
3.
4.
5.
Remove the headlamp  bulb cover
by turning it counterclockwise.
Disconnect   the   headlamp   bulb
socket-connector.
Unsnap the headlamp bulb retain-
ing wire  by pressing  the end  and
pushing it upward.
6.
7.
Remove  the bulb  from the  head-
lamp assembly.
Install  a new  headlamp bulb  and
snap the  headlamp bulb retaining
wire  into position  by  aligning  the
wire with the groove on the bulb.
7-86
Product Specification
Categories Hyundai Manuals, Hyundai Tucson Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 642 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Tucson
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field