Maintenance
6.
Remove the bulb from the socket Inside lamp
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7.
8.
Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
OTL075039
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
OTLE075016
Tail lamp/Back-up lamp
9.
Reinstall the lamp assembly to the
body of the vehicle.
1.
2.
3.
Turn off the engine.
Open the liftgate.
5.
Pull the bulb out of the socket.
Remove the service cover using a
flat-blade screwdriver.
Stop/tail lamp and Side marker
lamp (LED type)
6. Insert a new bulb into the socket.
7.
8.
Install the socket into the assem-
bly by aligning the tabs on the
socket with the slots on the
assembly and turning the socket
clockwise.
Reinstall the lamp assembly to the
body of the vehicle.
If the LED lamp does not operate,
have the vehicle checked by an
authorized HYUNDAI dealer.
7-90
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)