Features of your vehicle
4.
Firmly press, hold for 5 seconds 6. Firmly press and release the Gate operator & Canadian pro-
and release the programmed "leam" or "smart" button. (The gramming
HomeLink® button up to two sepa-
name and color of the button vary
by manufacturer). There are 30
seconds to initiate step 7.
During programming, your handheld
transmitter may automatically stop
transmitting. Continue to press the
rate times to activate the door. If
the door does not activate, press
and
hold
the
just-trained
7.
Return to the vehicle and firmly
Integrated
HomeLink ®
Wireless
HomeLink® button and observe
the indicator light.
press, hold for 2 seconds and Control System button (note steps 2
through 3 in the Programming por-
HomeLink ® button. Repeat the tion of this document) while you
release
the
programmed
•
If the indicator light stays on con-
stantly, programming is complete
"press/hold/release" sequence a press and re-press ("cycle") your
second time, and, depending on handheld transmitter every two sec-
the brand of the garage door onds until the frequency signal has
opener (or other rolling code been learned. The indicator light will
equipped device), repeat this flash slowly and then rapidly after
sequence a third time to complete several seconds upon successful
and your device should activate
when the HomeLink® button is
pressed and released.
•
If the indicator light blinks rapidly
for 2 seconds and then turns to a
constant light, continue with
"Programming" steps 5-7 to
complete the programming of a
rolling code equipped device
(most commonly a garage door
opener).
the programming process.
training.
Operating HomeLink®
To operate, simply press and release
the programmed HomeLink® button.
Activation will now occur for the
trained device (i.e. garage door
opener, gate operator, security sys-
tem, entry door lock, home/office
lighting, etc.). For convenience, the
hand-held transmitter of the device
may also be used at any time.
HomeLink® should now activate your
rolling code equipped device.
5.
At the garage door opener receiv-
er (motor-head unit) in the garage,
locate the "leam" or "smart" but-
ton. This can usually be found
where the hanging antenna wire is
attached to the motor-head unit.
4
66
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)