Features of your vehicle
This indicator light illuminates for 2 Turn Signal Indicator
High Beam Indicator
Light
seconds and goes off:
Light
•
When the vehicle can not detect
the smart key which is in the vehi-
cle while the Engine Start/Stop
Button is ON.
This indicator light blinks:
This indicator light illuminates:
•
When using the turn signals.
• When the headlights are on and in
the high beam position
• When the turn signal lever is pulled
into the Flash-to-Pass position.
In this case, have your vehicle
inspected
by
an
authorized
HYUNDAI dealer.
This indicator light blinks:
If any of the following occurs, there
may be a malfunction with the turn
signal system. In this case, have your
vehicle inspected by an authorized
HYUNDAI dealer.
Smart High Beam indi-
cator (if equipped)
•
When the battery of the smart key
is weak.
-
The indicator light does not blink
but illuminates.
The indicator light blinks more rap-
idly.
-
At this time, you can not start the
engine. However, you can start
the engine if you press the Engine
Start/Stop Button with the smart
This warning light illuminates :
-
•
When the high-Beam is on with the
light switch in the AUTO light posi-
tion.
key. (For more details, refer to - The indicator light does not illumi-
"Starting the Engine" in section
5).
When there is a malfunction with
the immobilizer system.
nate at all.
•
If your vehicle detects oncoming or
preceding vehicles, the Smart High
Beam system will switch the high
beam to low beam automatically.
•
In this case, have your vehicle
inspected
by
an
authorized
For more details, refer to "Smart
High Beam" in this chapter.
HYUNDAI dealer.
4
110
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)