Safety features of your vehicle
To remove the child restraint, press When the seat belt is allowed to
the release button on the buckle and retract to its fully stowed position,
then pull the lap/shoulder belt out of the retractor will automatically
the restraint and allow the seat belt to switch from the "Automatic lock-
retract fully.
ing" mode to the emergency lock
mode for normal adult usage.
WARNING - Automatic
locking mode
The lap/shoulder belt automati-
cally returns to the "emergency
lock mode" whenever the belt is
OMD030056A
allowed
to
retract
fully.
5.
6.
7.
Remove as much slack from the
belt as possible by pushing down
on the child restraint system while
feeding the shoulder belt back into
the retractor.
Push and pull on the child restraint
system to confirm that the seat
belt is holding it firmly in place. If it
is not, release the seat belt and
repeat steps 2 through 6.
Therefore, the preceding seven
steps must be followed each
time
a
child
restraint
is
installed.
If the retractor is not in the
Automatic Locking mode, the
child restraint can move when
your vehicle turns or stops sud-
denly. A child can be seriously
injured or killed if the child
Double check that the retractor is
in the "Automatic locking" mode by
attempting to pull more of the seat
belt out of the retractor. If you can-
restraint
is
not
properly
anchored to the car, including
setting the retractor to the
Automatic Locking mode.
not,
the
retractor
is
in
the
"Automatic locking" mode.
3
48
Product Specification
Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Santa Fe |
Document File Type | |
Copyright | Attribution Non-commercial |