ENGINE
6.
From all of the readings obtained, determine
highest protrusion figure and select the
appropriate cylinder head gasket.
Cylinder head - refit
1.
Ensure that mating faces of cylinder head and
block are clean and dry and that 2 locating
dowels are fitted in cylinder block.
Lubricate threads of new cylinder head bolts
with engine oil.
Protrusion 0.50 to 0.60 mm - select gasket with
1
identification hole.
Protrusion 0.61 to 0.70 mm - select gasket with
identification holes.
Protrusion 0.71 to 0.80 mm - select gasket with
identification holes.
Protrusion 0.81 to 0.90 mm - select gasket with
2.
3.
4.
5.
2
Check that cylinder head bolt holes in cylinder
block are clean and dry.
3
Rotate crankshaft in a clockwise direction until
pistons are half-way up cylinder bores.
Position the selected cylinder head gasket on
cylinder block ensuring that word "TOP" is
facing upwards.
0
identification holes.
NOTE: Identification holes are located on
the edge of the gasket.
6.
Using assistance, fit cylinder head ensuring
that it is located on dowels.
7.
8.
Remove DTI.
Rotate crankshaft in a clockwise direction until
all pistons are half-way up cylinder bores.
28
OVERHAUL
| Categories | Land Rover, Land Rover Defender, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1997 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English, German |
| Product Name | Discovery, Defender, Range Rover Gearbox |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)