ENGINE
Camshaft, bearings and cam followers -
inspection
1.
2.
Check camshaft cams and bearing journals for
overheating, wear and scoring, replace
camshaft if necessary.
If camshaft is replaced, new bearings must be
fitted.
3.
4.
Check timing gear drive pin for security.
Check camshaft bearings for overheating, wear
and scoring and that lubrication holes are
clear, replace as necessary. Bearings must be
replaced as a set.
5.
6.
Check cam follower slides, rollers and cam
follower guides for signs of wear.
Check that each slide moves freely in its guide
and that oilways are clear. Cam followers must
be replaced as an assembly.
11.
12.
Remove 2 bolts securing camshaft thrust plate
7. Check that oil passage in oil jet tube is clear.
8. Insert a piece of stiff wire in end of oil jet tube
and check that non-return valve can be
to cylinder block, remove and discard plate.
Carefully withdraw camshaft taking care not to
drop end of camshaft on to bearings.
depressed and closes under spring pressure.
74
OVERHAUL
| Categories | Land Rover, Land Rover Defender, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1997 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English, German |
| Product Name | Discovery, Defender, Range Rover Gearbox |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)