Important!
Warning!
Important!
5.
Start engine of the vehicle with
Never lean over batteries while
connecting or jump starting,
you might get injured.
A discharged battery can freeze at
approx. + 14°F (- 10°C). In that case, it
must be thawed out before jumper
cables are used. A frozen battery can
explode and cause personal injury.
the charged battery and run at
high idle. Make sure the cables
are not on or near pulleys, fans,
or other parts that will move
when the engine is started.
Then start engine of the
disabled vehicle in the usual
manner.
Battery fluid contains sulfuric acid.
Do not allow this fluid to come in
contact with eyes, skin or clothing.
In case it does, immediately flush
affected area with water, and seek
medical help.
Jumper cable specifications:
• Minimum cable cross-section of
25 mm or approx. 2 AWG
2
6.
After the engine has started,
remove jumper cables by
A battery will also produce
• Maximum length of 11.5 ft.
(3.5 m).
exactly reversing the above
installation sequence, starting
with the last connection made
first. When removing each
clamp, make sure that it does
not touch any other metal while
the other end is still attached.
hydrogen gas, which is flammable
and very explosive. Keep flames or
sparks away from battery, avoid
improper connection of jumper
cables, smoking etc..
108
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz S350 TURBODIESEL |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)