Windshield Washer Fluid Mixing
Ratio
Blocked Windshield Wiper
Signaling Turns with Hazard
Warning Flasher in Use
If the windshield wiper becomes
blocked (for example, due to snow),
switch off the wiper motor.
For temperatures above freezing:
For example, when the vehicle is being
towed (key in steering lock turned to
position 2):
MB Windshield Washer
Concentrate "S" and water
For safety reasons before removing ice
or snow, remove key from steering
lock. Remove blockage.
With hazard warning flasher on,
activate combination switch for left or
right turn signal - only the selected turn
signal will blink.
1
part "S" to 100 parts water
ml "S" to 1 gallon water).
(40
Activate combination switch again
(key in steering lock position 1).
For temperature below freezing:
Upon canceling the turn signal, the
hazard warning flasher will operate
again.
MB Windshield Washer Concentrate
"S" and commercially available
Emergency Operation of
Windshield Wiper
premixed windshield washer
solvent/antifreeze
In case of windshield wiper
malfunction, turn combination switch
to wiper setting II.
Turn Signal Failure
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster than normal rate. In
addition, the exterior lamp failure
indicator will come on.
1 part "S" to 100 parts solvent
(40 ml "S" to 1 gallon solvent).
Have the system checked at your
authorized MERCEDES-BENZ dealer
as soon as possible.
Windshield Wiper Smears
If the windshield wiper smears the
windshield, even during rain, activate
the washer system as often as
necessary. The fluid in the washer
reservoir should be mixed in the
correct ratio.
54
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz S350 TURBODIESEL |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)