Reinstall the jack, tools and spare tire lock.
To store the tools, follow these procedures:
For Utility Models:
1.
Put the tool kit, with the jack tools and gloves, in
the tool bag and place in the retaining clip under the
driver’s side second seat.
2.
3.
Tighten down with the wing nut.
Then, assemble wheel chocks and bottle jack
together with the wing nut and retaining hook.
4.
Position behind the jack storage cover in the left
rear side panel just below the speaker and tighten,
adjusting clockwise until the jack is secured tight
in the mounting bracket. Be sure to position the
holes in the base of the jack onto the pin in the
mounting bracket.
A. Hoist Assembly
B. Wheel Wrench
E. Valve Stem,
Pointed Up
F. Flat or Spare Tire
G. Tire Retainer
H. Hoist Cable
C. Jack Handle
Extensions
D. Hoist Shaft
5-31
Product Specification
Categories | GMC Manuals, GMC Yukon Manuals |
---|---|
Model Year | 2001 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
cant give a reveiw havenot
can not give a reveiw without seeing the manual
Unable to give full review since I have not downloaded the book. Review is based on ease of webpage instructions
Could not download