To replace the battery in the keyless entry transmitter:
Resynchronization
Resynchronization may be necessary due to the
security method used by this system. The transmitter
does not send the same signal twice to the receiver.
The receiver will not respond to a signal that has been
sent previously. This prevents anyone from recording
and playing back the signal from the transmitter.
To resynchronize your transmitter, stand close to
your vehicle and press and hold the LOCK and
UNLOCK buttons on the transmitter at the same time
for seven seconds. The door locks should cycle to
confirm synchronization. If the locks do not cycle,
see your dealer for service.
1.
2.
Insert a dime in the slot between the covers of the
transmitter housing near the key ring hole. Remove
the bottom by twisting the dime.
Remove and replace the battery with a three-volt
CR2032 or equivalent battery, positive (+) side up.
3.
4.
5.
Align the covers and snap them together.
Resynchronize the transmitter.
Check the operation of the transmitter.
2-11
| Categories | GMC Manuals, GMC Yukon Manuals |
|---|---|
| Model Year | 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 2.33 out of 3)
Automotive readers have rated 2001 GMC Yukon XL Owners Manual 2.3 out of 3.0 based on 3 product reviews. cant give a reveiw havenot
can not give a reveiw without seeing the manual
Unable to give full review since I have not downloaded the book. Review is based on ease of webpage instructions
Could not download