2002 Ford Explorer Owners Manual

Controls and features
3.
Simultaneously  press  and  hold
both  the HomeLink௡  and  hand-held
transmitter   button.  Do  not  release
the  bu tton  s until   st ep 4  ha s be en
comple  ted.
Some entry  gates  and  garage  door
openers  may  require  you to replace
step  3 with procedures   noted  in  the
“Gate Operator   and Canadian
Programming”  section  for Canadian
residents.
4.
The red  light  will flash slowly and  then  rapidly. Release  both  buttons
when  the red  light flashes  rapidly.  (The  rapid flashing  light indicates
acceptance   of the  hand-held  transmitters’  radio  frequency  signals.)
5.
Press  and hold  the  just-trained  HomeLink௡  button  and  observe  the red
light. If the  light  is a constant   red, programming   is complete  and  your
device  should activate  when  the  HomeLinkbutton   is pressed  and
released.  Not e:  To program  the  remaining  two HomeLink௡   buttons,
begin with  step  2 in the  “Programming”  section  — do  not  repeat  step  1.
If the  red light  blinks rapidly  for two  seconds  and  then  turns  to a
continuous  red,  proceed  with  steps  6 through  8 to  complete
programming  of a  rolling code  equipped  device.
6.
At the  garage  door opener   receiver  (motor-head  unit)  in  the garage,
locate  the “learn”  or “smart”  button  (usually  near  where  the hanging
antenna  wire  is attached   to the  unit) .
7.
Press  and release   the “learn”  or “smart”  button.  (The  name  and color
of the  button  may vary  by manufacturer.)
Not e: There  are  30 seconds  in  which to  initiate  step eight.
8.
Return  to the  vehicle  and firmly  press,  hold for two  seconds  and
release  the  HomeLinkbutton.  Repeat  the  press/hold/release   sequence
again, and,  depending  on  the  brand  of the garage  door  opener  (or  other
rolling code  equipped  device) , repeat   this sequence   a third  time to
complete  the  programming.
HomeLinkshould  now  activate  your rolling  code equipped   device. To
program  additional  HomeLinkbuttons   begin with  step  2 in the
“Programming”  section.  For questions   or comments,  please  contact
HomeLink at  www.home  lin k.com  or 1–800–355–3515.
105
Product Specification
CategoriesFord Explorer Manuals, Ford Manuals
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 336 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field