2002 Hyundai Grandeur Owners Manual

3-
10   WHAT TO DO IN AN EMERGENCY
D060I01E-GAT
8.
Wheel nut tightening torque:
After you  have  changed wheels,  al-
ways secure the flat tire in its place in
the trunk and return the jack and tools
to their proper storage locations.
Lower Vehicle and Tighten
Nuts
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm (65-80 lb.ft)
D060J01E-AAT
After Changing Wheels
D080A01A-AAT
IF YOUR CAR MUST BE TOWED
HXGS414
Lower the car to the ground by turning
the  wheel nut  wrench  counterclock-
wise.  Then  position  the  wrench  as
shown in the drawing and tighten the
wheel  nuts.  Be  sure  the  socket  is
seatedcompletelyoverthenut.Donot
stand on the wrench handle or use an
extensionpipeoverthewrenchhandle.
Go around the wheel tightening every
other nut until they are all tight.  Then
double-check each  nut for tightness.
After changing wheels, have a techni-
cian  tighten the  wheel  nuts  to their
proper torque as soon as possible.
o  OKFORAUTOMATIC  ORMANUAL
TRANSAXLE EQUIPPED VEHICLE
D060J01L
If you have  a tire gauge, remove the
valve cap and check the air pressure.
If the  pressure is  lower than  recom-
mended, drive  slowly to  the nearest
service station and  inflate to the cor-
rect pressure. If it is too high, adjust it
until it is  correct. Always reinstall the
valve cap after checking  or adjusting
tirepressure.Ifthecapisnotreplaced,
air may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
D080A01L
!
CAUTION:
Your car can be damaged  if towed
incorrectly!
Product Specification
Categories Hyundai Manuals, Hyundai Grandeur Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 230 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Grandeur
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field