6-
18 DO-IT-YOURSELF MAINTENANCE
G140D01S-GAT
Checking the Compressor Drive
Belt
B145A01L-GAT
CHANGING THE AIR FILTER
(ForEvaporatorandBlowerUnit)
The air filter is located in front of the
evaporator unit behind the glove box.
It helps to decrease pollutants from
entering the car and to filter the air.
2.5L
3.0L/3.5L
Power steering pump
Power steering pulley
Generator
A/C
pulley
Stopper
B760A08L
A/C pulley
Crank shaft pulley
2. Lower the glove box down com-
pletely after taking out the damper
strap from the hole.
Crank shaft pulley
G140D01L
When the air conditioning is being
used regularly, the compressor drive
belt tension should be checked at
least once a month.
To check the drive belt tension, press
down on the belt halfway between the
engine crankshaft and compressor
pulleys. Pressing with your finger, you
should not be able to deflect this belt
anymore than 8.0 mm. If you have
the instruments to check it with a
force of 98N (22 lb.), the deflection
should be approx. 8.0 mm (0.315
inches). If the belt is too loose, have
it adjusted by your Hyundai dealer.
B760A01L
1.
Open the glove box.
Remove the stoppers on the both
sides of the glove box.
B760A02L
3. Remove the glove box mounting
bolts (1) and screws (2) from the
glove box assembly, and then de-
tach the glove box assembly.
| Categories | Hyundai Manuals, Hyundai Grandeur Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grandeur |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)