6-
14 DO-IT-YOURSELF MAINTENANCE
1
. Using a wrench of the correct size,
loosen the oil filler plug by turning
it counterclockwise and remove it
with your fingers.
Use your finger or suitable tool to
feel inside the hole. The oil level
should be at its bottom edge. If it is
not, check for leaks before adding
oil. To refill the transaxle or bring
the oil level up, add oil slowly until
it reaches the proper level. Do not
overfill.
G110B03A-AAT
Recommended Fluid
G110D01L-AAT
To Check the Transaxle Fluid
Level
Your Hyundai automatic transaxle is
specially designed to operate with
DIAMOND ATF SP-III or SK ATF SP-
III. Damage caused by a nonspecified
fluid is not covered by your new ve-
hicle limited warranty.
2.
G110C02L-GAT
Transaxle Fluid Capacity
3.
Replace the plug, screw it in with
your fingers and then tighten se-
curely with the wrench.
The fluid capacity of the automatic
transaxle is 7.8 liters (2.5 V6)/8.5
liters (3.0/3.5 V6).
HXG065
Park the car on level ground with the
parking brake engaged. When the
transaxle fluid level is checked, the
transaxle fluid should be at normal
operating temperature and the en-
gine idling.
!
G110A01A-AAT
CHECKING THE TRANSAXLE
FLUID (AUTOMATIC)
WARNING:
The transaxle fluid level should be
checked when the engine is at
normal operating temperature. This
means that the engine, radiator,
exhaust system etc., are very hot.
Exercise great care not to burn
yourself during this procedure.
Transaxle fluid in the automatic
transaxle should be checked at those
intervals specified in the vehicle main-
tenance schedule in Section 5.
| Categories | Hyundai Manuals, Hyundai Grandeur Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grandeur |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)