2002 Hyundai Grandeur Owners Manual

FEATURES OF YOUR HYUNDAI   1- 21
Release the button to lock the anchor
into  position.  Try  sliding  the  height
adjustertomakesurethatithaslocked
into the position.
B180A01L-GAT
SEAT  BELTS-Driver's   3-Point
System  with Emergency  Lock-
ing Retractor
will also lock if you try to lean forward
too quickly. Check to  make sure that
the belt is properly locked and that the
belt is not twisted.
To Fasten Your Belt
!
B200A01A-GAT
Adjusting Your Seat Belt
WARNING:
o  The height  adjuster  must be  in
the  locked   position  when  the
vehicle is moving.
o  The misadjustment  of height of
the  shoulder belt  could  reduce
the effectiveness of the seat belt
in a crash.
B180A01L
To fasten your seat belt,  pull it out of
the retractor and insert  the metal tab
into the  buckle. There will  be an au-
dible "click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
is  adjusted  manually  so  that  it  fits
snugly around  your hips. If  you lean
forwardinaslow,easymotion,thebelt
will extend and let you move around. If
there is a sudden stop or impact, how-
ever, the belt will lock into position.  It
B200A01L
You should  place the belt  as low  as
possible  on  your  hips, not  on  your
waist. If the belt is located too high on
your body, you could slide under  it in
case  of accident  or  a  sudden stop.
This  could  result  of  death,  serious
injury or property damage. Both arms
should not be under  or over the belt.
Rather, one  should be  over and  the
other under, as shown  in the illustra-
tion.
Product Specification
Categories Hyundai Manuals, Hyundai Grandeur Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 230 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Grandeur
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field