Starting and turning off the engine
Before starting
After several unsuccessful attempts, have the system
checked at the nearest authorized Mercedes-Benz
Center.
Ensure that parking brake is engaged and that selector
lever is in position “P” or “N”.
Important!
Due to the installed starter non-repeat feature, the
electronic key must be turned completely to the left
before attempting to start the engine again.
Important!
In areas where temperatures frequently drop below -4°F
(-20
installed. Your authorized Mercedes-Benz Center will
advise you on this subject, see page 253.
°C) we recommend that an engine block heater be
Turning off with the electronic key
Put the selector lever in position “P” and turn the
electronic key in the starter switch to position 0 to stop
the engine.
Starting with the electronic key
The electronic key can only be removed with the
selector lever in position “P”.
Do not depress accelerator.
Turn electronic key in starter switch to position 2.
Briefly turn electronic key in starter switch clockwise to
the stop and release. The starter will engage until the
engine is running.
If engine will not run, and the starting procedure stops,
turn electronic key completely to the left and repeat
starting the engine.
Starting and turning off the engine
233
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |