Additional driving hints
Warning!
The driver must always be on the alert and observe
all traffic and intercede with steering and braking
inputs as necessary.
Distronic works to maintain the speed selected by
the driver unless a moving obstacle proceeding
directly ahead of it in the same travel direction is
detected (e.g. following another vehicle ahead at a
distance set by Distronic). This means that:
Important!
When starting the engine, Distronic goes through an
initialization and self-test phase – this can take up to
2
minutes.
•
your vehicle can pass another vehicle after you
change lanes,
The most likely cause for a malfunctioning system is a
by a dirty sensor (located behind the hood grille),
especially at times of snow and ice or heavy rain. In
such a case, Distronic will switch off, and the message
“DISTRONIC – CLEAN SENSOR!” appears in the
multifunction display.
•
while in a sharp turn or if the vehicle in front
is in a sharp turn, Distronic could lose sight of
a vehicle traveling in front of it, then your
vehicle could accelerate to the previously
selected speed.
Distronic regulates only the distance between your
vehicle and those directly ahead, but does not
register stationary objects in the roadway, e.g.:
Warning!
Distronic should not be used in snowy or icy road
conditions.
•
•
•
a stopped vehicle in a traffic jam.
a disabled vehicle.
For cleaning and care of the Distronic sensor see
page 384.
an oncoming vehicle.
Restart the engine after cleaning the sensor.
The following are some sample situations which may
influence the functions of Distronic.
Driving systems
267
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |