come on at all or if it fails to extinguish after
approximately 4 seconds or if it comes on thereafter, a
malfunction in the system has been detected.
In the operational mode, after the indicator lamp has
gone out following the initial check, interruptions or
short circuits in the airbag ignition circuit and in the
driver and front passenger seat belt buckle harnesses,
and low voltage in the entire system are detected and
indicated.
The following system components are monitored or
undergo a self-check: crash-sensor(s), airbag ignition
circuits, front seat belt buckles, emergency tensioning
retractors, seat sensor.
Warning!
Initially, when the electronic key is turned from starter
switch position 0 to position 1 or 2, malfunctions in the
crash sensor are detected and indicated (the “SRS”
indicator lamp stays on longer than 4 seconds or does
not come on).
In the event a malfunction of the “SRS” is indicated
as outlined above, the “SRS” may not be
operational. For your safety, we strongly
recommend that you visit an authorized
Mercedes-Benz Center immediately to have the
system checked; otherwise the “SRS” may not be
activated when needed in an accident, which could
result in serious or fatal injury, or it might deploy
unexpectedly and unnecessarily which could also
result in injury.
Have the system checked at your authorized
Mercedes-Benz Center immediately.
Note:
See page 299 for information on the supplemental
restraint system (SRS) indicator lamp.
Restraint systems
93
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |