Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Exterior lamps
360
Exterior lamps
Replacing bulbs
Warning!
Headlamp adjustment
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.
Correct headlamp adjustment is extremely important.
Check and readjust headlamps at regular intervals and
when a bulb has been replaced.
Warning!
Notes:
Bulbs and bulb holders can be very hot. Allow the
lamp to cool down before changing a bulb.
To prevent a possible electrical short circuit, switch off
lamp prior to replacing a bulb.
Halogen lamps contain pressurized gas. A bulb can
explode if you:
When replacing bulbs, install only 12 volt bulbs with
the specified watt rating.
•
•
•
touch or move it when hot,
drop the bulb,
When replacing halogen bulbs do not touch glass
portion of bulb with bare hands. Use plain paper or a
clean cloth.
scratch the bulb.
Wear eye and hand protection.
If the newly installed bulb does not light up, switch the
lamp off and on again. If the bulb still does not light up,
have the system checked at an authorized
Mercedes-Benz Center.
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |